[Open_electroporator] Timers, PWM, low-level MCU setup

John Griessen john at cibolo.com
Sat Mar 11 04:23:23 UTC 2017


On 03/10/2017 02:20 AM, Nathan McCorkle wrote:
> So I wrote a register dump function
> (https://gist.github.com/nmz787/f6516fbcd8071516e3cb7ec09cac7c15),
> I dumped the registers after the still-nonworking code that tries to
> setup n-pulse mode.
> Then I used micropython API to setup PWM on a timer ad GPIO in the
> all-manual example, and dumped the registers after.

I have to pack for going out onto Dept of Interior land in Utah to camp for
a few days and cannot look at that code right now.  I'll be out of email contact
until March 13 or 14.

>
> Tomorrow I will go through the CSV outputs in table-diff mode using
> Beyond Compare (paid GUI, but they offer a free-trial that is
> unlimited in time).
> There are 13 differences.

OK if you like to use that, but I won't be including it in the project docs
for this OSHWA certified project.

John


More information about the open_electroporator mailing list